3M Dynatel Model 1332 Far End Device For 965DSP
$89.95
Availability:
In stock
SKU
1L197
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- 3M Dynatel 1332 Far End Device w/ Case (BC# 37586)
Request a Quote for
3M Dynatel Model 1332 FED
The 3M™ Model 1332 Far End Device (FED) is an accessory device to the 3M™ Dynatel™ 965DSP Subscriber Loop Analyzer. When used with the Dynatel 965DSP, the FED improves work efficiency by automatically providing some necessary functions at the far-end of the pair under test during pair qualification testing. The 965DSP controls the FED using DTMF signaling.
The FED supports the following functions of the 965DSP Auto Test feature:
Specifications:
For full 3M Dynatel Model 1332 product specifications, please click here: 3M Dynatel Model 1332
The 3M™ Model 1332 Far End Device (FED) is an accessory device to the 3M™ Dynatel™ 965DSP Subscriber Loop Analyzer. When used with the Dynatel 965DSP, the FED improves work efficiency by automatically providing some necessary functions at the far-end of the pair under test during pair qualification testing. The 965DSP controls the FED using DTMF signaling.
The FED supports the following functions of the 965DSP Auto Test feature:
- Loop Resistance (shorts Tip to Ring)
- Resistive Balance (shorts Tip-Ring to Ground)
- Single Tone & Sweep Loss (sends loss tone)
Specifications:
| Size | 2.6” X 4.7” X 0.9” (6.6 X 11.9 X 2.3 cm) |
| Weight | 5.6 oz. (159 g.) with battery |
| Oper. temp | 0 to +140°F (-18 to +60°C) |
| Stor. temp. | -40 to +165°F (-40 to +75°C) |
| Battery life: | 40 hours typical |
| Battery shelf life | 2 months (installed) |
| Replacement battery: | Duracell MN1604 or equivalent |
| Strap resistance: | Less than 0.2 ohms |
| DC input impedance: | >100 megohms tip-ring-gnd |
| AC input impedance: | ~100 kohms in series with 470 pf tip-ring |
| Voltage rating: | 250 Vdc, 150 Vac |
| ID tone frequency: | 577 Hz & 1004 Hz |
| ID tone amplitude: | 8 volts p-p no load typical |
| Transmitted tones: | 0 dBm ± 0.5 dBm 400 Hz to 100 kHz 0 dBm ± 1.0 dBm 100 kHz to 1.2 Mhz |
For full 3M Dynatel Model 1332 product specifications, please click here: 3M Dynatel Model 1332
| Included |
|
|---|