JDSU Acterna HST-3000 T1 / T3 Tester

• JDSU HST-3000 HandHeld Consumer Services Tester w/ Options: (BC# 27245)
  • Ethernet Analysis Fiber Fiber Optic Interference
  • PCM TIMS
  • Pulse Shape
  • User Scripting
  • T1 Signaling
  • VT100 Emulation
• JDSU HST-3000 SIM T1/T3 Module (BC# 27246)
• (2) BNC Cables
• Ethernet Cable
• (2) Bantam Cables
• Battery Pack
• AC Adapter/Charger
• Power Cord
• User Manual On CD-ROM
• Carrying Case (G)

Improving the installation, maintenance and troubleshooting of DSL services
With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In todayﾒs market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operatorﾒs entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.

The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment.

For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing.

As a widely deployed service, ISDN is a key source of revenue for telecommunication service providers world-wide. This, coupled with todayﾒs reduced budgets and smaller workforces, make it more critical than ever to ensure the timely and successful turn up and maintenance of ISDN service ﾖ the first time out. Additionally, thorough ISDN testing can prove more complex than basic physical layer and BER testing for technicians who lack the necessary training. To meet these challenges, an easy-to-use, versatile test solution is required that helps reduce failures and repeat rates while enhancing efficiency and ensuring consistent test practices.

The Acterna HST-3000 is a powerful and versatile test instrument for testing ISDN PRI service. Hand-held, rugged and easy-to-use, the HST-3000 is ideal for field use. Its modular design provides a scalable, all-in-one solution for ISDN testing, as well as thorough testing of the facilities over which it is provided.

The HST-3000 ISDN PRI option enables testing of Primary Rate ISDN circuits at both the customer site and central office. It supports call placement, receipt, D-Channel Decode analysis for 23B+D, NFAS (Non-Facility Associated Signaling), 24B and backup D channel switching. With the full range of T1 loopcodes and BERT patterns it can also test BER across any combination of channels to verify service before delivery to the customer.

Highlights

• A combined tester for Copper and DSL testing
• Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
• Modular hardware and software architecture is flexible and easily upgraded
• Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
• Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

• Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm ﾓmini-bananaﾔ jacks
• ADSL: 8-pin modular
• 10/100 BT Ethernet jack: 8-pin modular
• Serial port: DB9 female via cable (DCE)
• USB Host
• USB Device
• Bluetooth short-range wireless

ADSL Standards

• ANSI T1.413
• ITU G.992.
• 1 Annex A
• ADSL over POTS
• (G.DMT)
• G.992.2 (G.Lite)
• Cisco CAP

General Specifications

• Ruggedness: Survives 3-ft drop to concrete on all sides
• Water-resistance: Splash proof: may be used in heavy rain
• Language: English
• Keypad: Typical 12-button keyboard

Physical Specifications

• Size (H x W x D): 9.5 x 4.5 x 2.75 in
• Weight: 2.7 lb with battery
• Operating temperature: 22°F to 122°F
• Storage temperature: ﾖ40°F to 150°F
• Battery life: 10 hrs. typical usage
• Charging time: 7 hours from full discharge to full charge
• Operating humidity: 10% to 80% relative humidity
• Storage humidity: 10% to 95% relative humidity
• Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

T1 / T3 Service Interface Module (SIM) Dual TX/RX Bantam T1 Interface and Dual RX/Single TX BNC DS3 Interface/and DS3

• Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation
• VT100 emulation for access to T1, HDSL, HDSL2, HDSL2- 4 wire performance statistics
• Copper option adds in-depth copper measurements including DVOM, graphical TDR, RFA/RFL, and load coil counter
• Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures
• Modular hardware and software architecture allows easy upgrades and enhancements
• T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included
• Lightweight, rugged, water resistant, and battery powered handheld test instrument
• NetAnalyst control of Data Network Analyzer test devices

Having trouble viewing this file? Click this link to download