AFL Noyes OPM4 SM MM Fiber Optic Loss Test Set
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Noyes OPM 4-4C Optical Power Meter (BC# 13143)
- 850nm
- 980nm
- 1310nm
- 1480nm
- 1550nm
- 1625nm
- Interchangeable SC Connector
- Noyes OLS1 Dual Light Source (BC# 13142)
- 850nm
- 1300nm
- Interchangeable SC Connector
- Noyes OLS2 Dual Laser Source (BC# 13141)
- 1310nm
- 1550nm
- Interchangeable SC Connector
- Noyes 5400-00-0201 Mandrell
- Noyes 5400-00-0202 Mandrell
- Fiber Cables:
- (2) SM SC-SC
- (2) MM SC-SC
- User Manual On CD-ROM
- Carrying Case (G)
OLS1 Dual Light Source
|
OPTICAL |
OLS1-DUAL (SINGLE PORT) |
|
|
Wavelength |
850 ±30 nm |
1300 +50/-10 nm |
|
Emitter Type |
LED,Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
|
|
Spectral Width |
40 nm (typ) |
120 nm (typ) |
|
Output Power |
>-20 dBm b |
|
|
Output Stability |
±0.1 dB over 8 hours (after 5-minute warm-up) |
|
|
Fiber Size |
62.5 µm c |
|
|
GENERAL |
||
|
Power |
2 AA batteries, optional AC adapter |
|
|
Battery Life |
Typical 30 hours, minimum 20 hours |
|
|
Available Adapters |
SC, FC, ST |
|
|
Operating Temperature |
-10°C to 50°C, 90 % RH (non-condensing) |
|
|
Storage Temperature |
-30°C to 60°C, 90 % RH (non-condensing) |
|
|
Size (H x W x D) |
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) |
|
|
Weight |
0.29 kg (0.65 lb) |
|
OLS2 Dual Laser Source
|
The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. |
||||||||||||||||||||||
Features:
|
Noyes OPM 4 - Adds Wave ID & Set Reference
The Noyes OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.
The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
The OPM 4-4C is calibrated at 850, 980, 1310, 1480, 1550, 1625 nm and designed for the higher power level requirements of long range, amplified optical spans used in CATV and DWDM networks.
Specifications:
| Optical Specifications | OPM 4-4C |
| Calibrated Wavelengths (nm) | 850, 980, 1310, 1480, 1550, 1625 |
| Detector Type | Filtered InGaAs |
| Measurement Range (dBm) | +26 to -50 |
| Accuracy (dB) | +-.25 |
| Measurement Units | dB, dBm, uW |
| General Specifications | |
| Power | typical 60 hours with 9V battery |
| Adapter caps | order separately (ST, SC, FC, and others available) |
| Operating temperature | -10 to 50°C |
| Relative humidity | 0 to 95% (non-condensing) |
| Storage temperature | -30 to 60°C |
| Size (H x W x D) | 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) |
| Weight | 0.58 lb (0.26 kg) |
For full Noyes OPM 4 OLS 1 OLS 2D product specifications, please click here: Noyes OPM 4 OLS 1 OLS 2D
| Included |
|
|---|