JDSU Test-Um NT750 LanScaper Network Cable Tester
$0.00
Availability:
Out of stock
SKU
1N09
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
Request a Quote for
- JDSU LanScaper Network & Cable Tester (BC# 28571)
- Test-Um TT100 Tone Tracer (BC# 28570)
- Test-Um Remote ID's 91-8)
- Ethernet Cable
- (2) RJ45 To Dual Clip Cables
- (2) R45 To Coax Adapters
- (4) Rj11 Patch Cords
- Hard Copy User Manual
- Carrying Case
JDSU LanScaper NT750 Kit
The LanScaperﾙ is a jack identifier, cable tester, length measurement device, and ping tester in one unit.
The easy-to-use LanScaper enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, Token Ring, or other devices. It pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain network information.The LanScaper can quickly identify hubs, NICs, or auto MDI/MDI-X devices and conduct link tests to identify speed and capabilities of network drops.
For cable testing, the LanScaper provides full cabling testing, displaying wire map, ID, and faults, including shorts, opens,miswires, split pairs, and reverses.The fullfeatured LanScaper also measures cable length and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.
Features:
Specifications:
For full JDSU NT750 product specifications, please click here: JDSU NT750
The LanScaperﾙ is a jack identifier, cable tester, length measurement device, and ping tester in one unit.
The easy-to-use LanScaper enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, Token Ring, or other devices. It pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain network information.The LanScaper can quickly identify hubs, NICs, or auto MDI/MDI-X devices and conduct link tests to identify speed and capabilities of network drops.
For cable testing, the LanScaper provides full cabling testing, displaying wire map, ID, and faults, including shorts, opens,miswires, split pairs, and reverses.The fullfeatured LanScaper also measures cable length and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.
Features:
- Detects and reports speed and capabilities for active Ethernet and other devices up to 100 Mb/s
- Pinging function verifies connectivity to network devices
- Blinks link indicator to identify cable termination on active ports
- Identifies hubs, NICs or auto MDI/MDI-x devices
- Tests cabling configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
- Displays length measurement for each pair in feet or meters
- Generates selectable tones on selected pins for use with tone tracers
Specifications:
| Electrical | |
| Battery life | Times are for the full capacity of the battery used continuously in one of the following modes |
| Standby mode | 2.5 Years |
| Cable testing mode | 50 hrs(nobacklight) 14 hrs(50% backlight) |
| Network testing mode | 15 hrs(no backlight) 14 hrs(50% backlight) |
| Cable types | |
| Shielded or unshielded, CAT3,CAT4,CAT5,CAT5E, and coax | |
| Minimum cable length for testing for split pairs |
1m (3ft) |
| Minimum cable length for single-ended cable test |
1.25m (4ft) |
| Length measurement range (CAT5/6) |
0 to 457m (0 to 1,500 ft) |
| Environmental | |
| Operating temperature | 0 to 50°C (32 to 122°F) |
| Storage temperature | ﾖ30 to 80°C (ﾖ20 to 176°F) |
| Humidity | 10 to 90%, non-condensing |
| Physical | |
| Length | 15cm (5.9in) |
| Width | 7.4cm (2.9in) |
| Height | 3.2cm (1.25in) |
| Weight(with battery) | 200g (7oz) |
For full JDSU NT750 product specifications, please click here: JDSU NT750
| Included |
|
|---|