EXFO MaxTester II FOT-930 SM MM Fiber Tester
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- EXFO FOT-932-12D-FP-EI MaxTester II (BC# 28884)
- SM FasTest Source:
- 1310nm
- 1550nm
- MM FasTest Source:
- 850nm
- 1300nm
- (2) SC Connectors For Source
- Power Meter:
- 800nm
- 840nm
- 850nm
- 860nm
- 910nm
- 980nm
- 1280nm
- 1300nm
- 1310nm
- 1320nm
- 1450nm
- 1480nm
- 1510nm
- 1520nm
- 1530nm
- 1540nm
- 1550nm
- 1560nm
- 1570nm
- 1625nm
- SC Connector For Power Meter
- SM FasTest Source:
- (2) SM SC-SC Fiber Cables
- (2) MM SC-SC Fiber Cables
- (4) Fiber Wipes
- AC Adapter/Charger
- RS232 PC Interface Cable
- Strap For Unit
- Carrying Case w/ Strap
FOT-932 Ge detector
The new FOT-932 MaxTester II Multifunction Loss Tester is designed to help network service providers address CAPEX and OPEX issues, enable installers to easily adapt to all network types, and provide CATV operators with a single-unit solution to their backreflection, fiber-length, high-power and bidirectional loss measurement needs. Combined with its video fiber inspection probe, this unit also enables the easy detection of dirty or damaged connectors, providing a clear view of connectors and fiber ends on the FOT-932ﾒs high-resolution display.
With countless configurations available, the FOT-932 MaxTester II is the handheld unit of choice for todayﾒs network service providers, fiber-optic network installers/contractors and CATV operators.
FTTx-Mode Operation
This mode lets you configure your FOT-930 MaxTester to suit your FTTx wavelengths and test-unit locations as well as choose your preferred data presentation options for on-screen display or report generation. Key benefits include:
- Display of test data according to FTTx terminology
- Similar test-data presentation, regardless of the location of master and remote units
FOT-932-12D Specifications:
| FOT-932 External Power Meter | |
| Detector type | Ge |
| Measurement range (dBm) | 10 to -70 |
| Range displayed (dBm) | Down to -90 |
| Uncertainty | ± 5 % (± 0.1 nW) |
| Wavelength range (nm) | 800 to 1650 |
| Display resolution (dB) | 0.01 |
| Calibrated wavelengths | 40 |
| Standard Source | |
| Wavelengths (nm) | 1310 ± 20 1550 ± 20 |
| Emitter type | Laser |
| Minimum output power (dBm) | -3.5/-3.5 |
| Spectral width (nm) | ≤ 5/≤ 5 |
| Stability (8 hours) (dB) | ± 0.05 |
| -12D Source (second port) | |
| Wavelengths | 850 ± 25 1300 +50/–10 |
| Emitter type | LED |
| Minimum output power (dBm) | –21/–21 (62.5/125 µm) |
| Spectral width (nm) | 50/135 |
| Stability (8 hours) (dB) | ± 0.05 |
| FasTest Standard Source | |
| Wavelengths (nm) | 1310 ± 20 1550 ± 20 |
| Loss range (dB) | 60 |
| Loss precision (repeatability) (dB) | Side-by-side: 0.15 Loopback: 0.25 |
| Length measurement range (km) | 200 |
| Length measurement uncertainty | ± (10 m + 1 % x distance) |
| FasTest -12D (second port) Source | |
| Wavelengths (nm) | 850 ± 25 1300 +50/–10 |
| Loss range (dB) | 46 |
| Loss precision (repeatability) (dB) | Side-by-side: 0.15 Loopback: 0.25 |
| Length measurement range (km) | 5 |
| Length measurement uncertainty | ± (10 m + 1 % x distance) |
| General Specifications | |
| Size (H x W x D) | 25.0 cm x 12.5 cm x 7.5 cm (9 7/8 in x 4 15/16 in x 3 in) |
| Weight | 1 kg (2.2 lb) |
| Temperature | Operating: –10 °C to 50 °C (14 °F to 122 °F) Storage: –40 °C to 70 °C (–40 °F to 158 °F) |
| Storage | capacity 1024 complete tests |
| Relative humidity | 0 % to 95 % non-condensing |
| Power | Li-ion battery 9 hours 3 hours to fully recharge when unit is off |
For full EXFO MaxTester II FOT-932 product specifications, please click here: EXFO MaxTester II FOT-932
| Included |
|
|---|