Fluke LANMeter Series 100 MHz Remote
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
- Fluke LANMeter 100 MHz Remote
- Ethernet Cable
- User Manual On CD-ROM
- Carrying Case
Fluke 100 MHz LANMeter Remote
Testing 100 ohm twisted pair with your Fluke LANMeter requires the optional 100 MHz remote adapter. If the optional 100 MHz remote adapter is used to test 100 ohm twisted pair cable, the results comply with EIA 568A, TSB-67 requirements for Level I test of Basic Link or Channel configurations.
NEXT
The NEXT measurement requires the optional 100 MHz remote. For 100 ohm twisted pair cable the test performs a near-end crosstalk (NEXT) test at frequencies up to 100 MHz, depending on configuration.
Attenuation
The attenuation measurement requires the optional 100 MHz remote. Attenuation is a measure of loss of signal strength along the cabling link, and changes with the frequency of the signal. For 100 ohm twisted pair cable the test performs an attenuation test at frequencies up to 100 MHz, depending on configuration.
For full Fluke Networks LANMeter Remote product specifications, please click here: Fluke Networks LANmeter Remote
| Included |
|
|---|