Fluke i1000s Clamp On AC Current Probe
$295.00
Availability:
In stock
SKU
11H53
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Fluke i1000s AC Current Clamp Probe (BC# 14552-L/T*)
Request a Quote for
Fluke i1000S AC Current Probe
The Fluke i1000s is a clamp-on ac
current probe designed to expand oscilloscope applications in industrial and
power environments. Ideal for measuring distorted current waveforms and
harmonics.
The i1000s is compatible with any oscilloscope that accepts a
standard BNC connector and has an input impedance of greater than or equal to 1
M? in parallel with a maximum of 47 pF. To achieve the stated accuracy, use
the i1000s with an oscilloscope having an accuracy of ﾱ 2 % or better.
The i1000s may be used with digital multimeters (DMMs) if a BNC to banana
jack adapter is used.
Features:
- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
- Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter
Specifications:
| Nominal current range |
10 A 100 A 1000 A |
| Continuous current range |
0.1 A - 10 A 0.1 A - 100 A 1 A - 1000 A |
| Maximum Non-Destructive Current |
2000 A |
| Lowest measurable current |
0.1 |
| Basic Accuracy |
1% + 1 A (48-65 Hz) (% reading + floorspec) |
| Useable frequency |
5 Hz - 100 kHz |
| Output level(s) |
100 mv/A 10 mv/A 1 mv/A |
| Safety Specifications | |
| Safety |
CAT III, 600 V CAT IV, 300 V |
| Maximum voltage |
600 V AC |
| Mechanical & General
Specifications | |
| Maximum conductor diameter |
54 mm |
| Output cable length |
1.6 m |
| BNC Adapter |
Yes |
| Included |
|
|---|